High Lifter Front Forward Arms for Polaris General 1000 EPS & RZR S

High Lifter’s service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also making sure the clip is fully seated and secured. Purchasing control arms with the ball joints already installed prevents damage due to improper installation, which is not covered by High Lifter’s Lifetime Warranty. The ball joints preinstalled in this kit are BJP-3. Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing. Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Even better, High Lifter will install your ball joints before shipping. (See our control arms with preinstalled ball joints.) Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. Features: Grease fittings included for most models Added ground clearance featuring bends that maximize clearance and axle protection Tire Fitment: Up to 31" without lift kit and up to 33" with lift kit. Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

• QUALITY & DESIGN MEET: Control arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. High Lifter's precision manufacturing process ensures each control arm installs exactly like the factory arm..
• PREMIUM CONSTRUCTION: 25% larger than average stock arms - Crafted from 1 ¼” DOM steel; up to 2.5x the wall thickness of an average stock arms - .188” wall thickness; grease fittings included for most models.
• EASY INSTALL: Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation.
• NOTE: Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner.
• QUALITY YOU CAN TRUST: This product is backed by High Lifter's Limited Lifetime Warranty, giving you peace of mind as you tackle the toughest of terrains (excludes wearable items such as bearings, cones, and heim joints).